Analisis pemotongan logam ST-37 dengan mesin potong menggunakan gas oxy-LPG

Ade Irvan Tauvana, Widodo Widodo

Abstract


This gas cutting machine is an ST-37 metal cutting tool in a semi-automatic way using Liquified Potroleum Gas (LPG) and Oxygen gas materials. LPG gas is used with a composition of propane 80% and Isobutane 20%. In the process of cutting metal based on several parameters, namely: metal thickness, oxygen gas pressure, and LPG gas and cutting speed. Before cutting down the metal, the preparation stage is done by conditioning the test equipment and work equipment used to collect test data. The method used in this research is to select the type of metal and cutting equipment then do the recording and taking test data. Further analysis and examination are carried out as follows: visual inspection of the results of cutting and flame shape, a better composition results from testing in accordance with applicable rules such as pressure, plate thickness, and time of cutting. 80% and 20% LPG gas composition at gas working pressure: 0.2 kg / cm2, oxygen pressure: 2.5 kg / cm2, cutting distance of 2 mm. The results of this test are overall in good condition and no defects occur.
Keywords: LPG Gas cutting, Propane, Isobutane, Cutting speed, oxygen.


Full Text:

PDF

References


Syarief Firman Akbar, Bambang Kusharjanta, Pemotongan Plat Baja Dengan Gas Cutting Machine, UNS, 2010

Adiguna, Indrawan Maulana, Murni, Rancang Bangun Las Potong Portable (Design Of Portable Welding Machine), Universitas Diponegoro, 2015.

P. Kulkarni, P. Randive, and A. R. Mache, "MicroController based Oxy-Fuel Profile Cutting System", World Academy of Science, Engineering and Technology 47, 2008.

Ajay M Patel1 Dhaval ShahMudit Kothari, Design and Manufacturing of Automated Gas Profile Cutting Machine using PLC; IJSRD - International Journal for Scientific Research & Development| Vol. 3, Issue 05, 2015 | ISSN (online): 2321-061

Huawei Welding and Cutting. Manual book. Operating Intructions CG1- 30 Gas Cutting Machine. Huawei. Shanghai

Osamah F,Abdulateef, Faiz F. Mustafa and Salah A. Salman, “Prediction the Effect of Flame Cutting Parameters on the Quality of Metal Surface In CNC Flame Cutting Machine Using Artificial Neural Network” The Iraqi Journal For Mechanical And Material Engineering, Vol.10, No.3, 2010.

Sunaryo, Heri. 2008. Teknik Pengelasan Kapal Jilid 1. Direktorat Pembinaan Sekolah Menengah Kejuruan. Jakarta

Wahyu Catur N. Wahyu Setyo P. 2016 Sistem Pengaturan Pembukaan Gas Acitelin Dan Oksigen Pada Scator Untuk Pemotongan Plat Baja Seminar Nasional Sains dan Teknologi Terapan IV ISBN 978-602-98569-1-0 Institut Teknologi Adhi Tama Surabaya.




DOI: http://dx.doi.org/10.24127/trb.v9i1.1142

Refbacks

  • There are currently no refbacks.