PELATIHAN PEMANFAATAN KOMPRESOR BEKAS AC SEBAGAI KOMPRESOR UDARA UNTUK KENDARAAN DI SMK MUHAMMADIYAH 1 RUMBIA

Authors

  • Mafruddin Mafruddin Teknik Mesin Universitas Muhammadiah Metro
  • Dwi Irawan Teknik Mesin Universitas Muhammadiah Metro
  • Ahmad Okhtri Saputra Teknik Mesin Universitas Muhammadiah Metro
  • Mustofa Mustofa Teknik Mesin Universitas Muhammadiah Metro

DOI:

https://doi.org/10.24127/sss.v4i1.1709

Keywords:

Pelatihan, Pembuatan Kompresor, Siswa SMK.

Abstract

ABSTRAK

SMK Muhammadiyah 1 Rumbia merupakan salah satu SMK yang berada di Kabupaten Lampung Tengah. Salah satu jurusan di SMK muhammadiyah 1 Rumbia yaitu Teknik Kendaraan Ringan (TKR) yang mempelajari tentang kendaraan ringan seperti minibus dan mobil-mobil pemumpang lainnya. Materi yang diajarkan yaitu tentang perawatan mesin, kelistrikan, perawatan sasis dan perawatan serta perbaikan bodi kendaraan. Perbaikan bodi kendaraan salah satunya yaitu pengecatan. Untuk proses pengecatan dibutuhkan kompresor udara yang berfungsi sebagai pemompa udara bertekanan. Jurusan TKR merupakan jurusan yang baru dibuka pada tahun 2018, sehingga untuk perlengkapan praktikum masih ada beberapa yang belum terpenuhi salah satunya yaitu kompresor udara. Atas dasar pertimbangan tersebut maka dalam kegiatan pengabdian kepada masyarakat ini akan dilakukan pelatihan pembuatan kompresor udara dengan memanfaatkan kompresor bekas AC. Dengan adanya kegiatan ini diharapkan dapat meningkatkan pemahaman siswa tentang pemanfaatan barang bekas seperti kompresor AC bekas menjadi kompresor udara yang nantinya dapat digunakan untuk mengisi udara pada kendaraan dan sebagai pemompa udara pada proses pengecatan. Pelatihan dilakukan dengan memberikan materi dan penjelasan serta pelatihan yang diikuti oleh siswa kelas X dan XI di SMK Muhammadiyah 1 Rumbia Lampung Tengah. Dengan adanya pelatihan maka dapat meningkatkan pengetahuan siswa tentang komponen yang dibutuhakn, cara pembuatan, cara penggunaan dan cara perawatan kompresor udara dari kompresor bekas AC.

 

Kata Kunci : Pelatihan, Pembuatan Kompresor, Siswa SMK.

 

ABSTRACT

 

SMK Muhammadiyah 1 Rumbia is one of the vocational schools in Central Lampung Regency. One of SMK Muhammadiyah 1 Rumbia's specializations is Light Vehicle Engineering (TKR), which studies light vehicles such as minibuses and other passenger cars. The material taught is about engine maintenance, electricity, chassis and body maintenance and repairs. One of the repairs to the vehicle body is the paint job. For the painting process, an air compressor that works as a pressurized air pump is required. The TKR department is a department that just opened in 2018, so for stage equipment there are still some that have not been fulfilled, one of them is an air compressor. Based on these considerations, in this community service activity, training in the manufacture of air compressors will be conducted using used air conditioning compressors. This activity is expected to increase students' understanding of the use of used goods, such as AC compressors used in air compressors that can later be used to fill air in vehicles and as air pumps in the process of painting. The training was carried out with the provision of materials and explanations, as well as the training that was attended by the students of grades X and XI at SMK Muhammadiyah 1 Rumbia Central Lampung. With training, you can increase students' knowledge about the necessary components, how to manufacture, how to use and how to maintain an air compressor from a used air conditioning compressor.

 

Keywords: Training, Compressor Manufacturing, Vocational High School Students.

References

Effendy, M. (2005). Pengaruh Kecepatan Putar Poros Kompresor Terhadap Prestasi Kerja Mesin Pendingin AC. Jurnal Mesin Teknologi, 3(1).
Fritz, D. (1988). Turbin Pompa dan Kompresor. Jurnal Teknik Mesin Untirta, 4(1).
Prastyo, I. R. (2010). Pembuatan Alat Praktikum Perawatan Kompresor Torak Ganda (Doctoral dissertation, Universitas Sebelas Maret).
Setiawan, I., Sudrajad, A., & Auriga, M. (2015). Analisa Kebisingan Alat Praktikum Kompresor Torak pada Laboratorium Prestasi Mesin. FLYWHEEL: Jurnal Teknik Mesin Untirta, 2(1).
Syawal, S., & Yusuf, M. (2011). Perencanaan kompresor piston pada tekanan kerja max 2 N/mm2. Jurnal Mesin Teknologi, 5(1).

Downloads

Issue

Vol. 4 No. 1 (2020): Februari 2020

Section

Artikel

License

Authors who publish with this journal agree to the following terms:

    • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.  Creative Commons Attribution 4.0 International License.
    • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
    • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
    • The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
Creative Commons License
Creative Commons License
SINAR SANG SURYA: Jurnal Pusat Pengabdian kepada Masyarakat is licensed under a Creative Commons Attribution 4.0 International License.