PELATIHAN PENGGUNAAN SCANNER DAN MAINTENANCE MOBIL INJEKSI UNTUK GURU-GURU SMK DI KOTA METRO

Authors

  • Kemas Ridhuan Fakultas Teknik Universitas Muhammadiah Metro
  • Sulis Dri Handono Fakultas Teknik Universitas Muhammadiah Metro
  • Asroni Asroni Fakultas Teknik Universitas Muhammadiah Metro
  • Tri Cahyo Wahyudi Fakultas Teknik Universitas Muhammadiah Metro
  • Dwi Irawan Fakultas Teknik Universitas Muhammadiah Metro
  • Mafruddin Mafruddin Fakultas Teknik Universitas Muhammadiah Metro
  • Eko Budiyanto Fakultas Teknik Universitas Muhammadiah Metro
  • Eko Nugroho Fakultas Teknik Universitas Muhammadiah Metro

DOI:

https://doi.org/10.24127/sss.v7i2.2779

Keywords:

Pelatihan, scanner, injeksi, Guru SMK

Abstract

ABSTRAK

 

Sistem Electronic Fuel Injection (EFI) dan ECU (elektronic control unit) pada mobil berfungsi mengatur jumlah bahan bakar yang digunakan, system pengapian dan beberapa perangkat lainnya. Penggunaan sistem ECU pada kendaraan bermotor khususnya mobil mampu meningkatkan kinerja mobil itu sendiri. Perangkat ECU merupakan salah bentuk perkembangan teknologi dibidang otomotif. Namun perkembangan teknologi tersebut harus diimbangi dengan pemahaman dari pengguna maupun mekanik mobil sehingga apabila terjadi kerusakan pada kendaraan khususunya mobil dapat terdeteksi dan dilakukan perbaikan. Kerusakan ECU dan perangkat atau komponen lain pada sistem injeksi dapat dilakukan pemeriksaan melalui proses scanner dengan bantuan perangkat komputer atau scanner. Yang menjadi kendala saat ini yaitu belum semua mekanik atau bengkel mampu menggunakan alat scanner tersebut untuk pemeriksaan kendaraan khususnya mobil. Hal tersebut terjadi karena kurangnya pengetahuan dan wawasan khususnya tentang proses scanner mesin mobil. Berdasarkan pertimbangan tentang kurangnya pengetahuan dan wawasan mengenai proses scanner untuk mesin mobil maka perlu dilakukan pelatihan tentang cara penggunaan dan perawatan alat scanner kepada para tenaga pendidik (guru) khususnya SMK otomotif. Dengan adanya pelatihan diharapkan dapat meningkatkan pengetahuan dan wawasan dari tenaga pendidik (guru) yang nantinya akan diajarkan kepada siswa/siswi sehingga dapat meningkatkan kuailtas lulusan. Pelatihan dilakukan dengan memberikan materi, penjelasan serta pelatihan yang diikuti oleh mitra (guru-guru SMK). Dengan adanya pelatihan maka dapat meningkatkan pengetahuan dan keterampilan mitra dalam perawatan, pemeriksaan dan perbaikan sistem injeksi pada mesin mobil menggunakan

peralatan scanner.

 

Kata Kunci : Pelatihan, scanner, injeksi, Guru SMK.

 

ABSTRACT

The Electronic Fuel Injection (EFI) system and the ECU (electronic control unit) on the car function to regulate the amount of fuel used, the ignition system and several other devices. The use of the ECU system in motor vehicles, especially cars, can improve the performance of the car itself. The ECU device is a form of technological development in the automotive field. However, these technological developments must be balanced with understanding from users and car mechanics so that if there is damage to the vehicle, especially the car, it can be detected and repaired. Damage to the ECU and other devices or components in the injection system can be checked through a scanner process with the help of a computer or scanner. The problem now is that not all mechanics or workshops are able to use the scanner to inspect vehicles, especially cars. This happens because of a lack of knowledge and insight, especially about the process of car engine scanners. Based on considerations about the lack of knowledge and insight about the scanner process for car engines, it is necessary to conduct training on how to use and maintain scanner tools for educators (teachers), especially automotive vocational schools. With the training, it is expected to increase the knowledge and insight of educators (teachers) which will later be taught to students so that they can improve the quality of graduates. The training is carried out by providing materials, explanations and training which is attended by partners (vocational teachers). With the training, it can increase the knowledge and skills of partners in the maintenance, inspection and repair of injection systems on car engines using scanner equipment.

Keywords: Training, scanner, injection, SMK teachers.

References

A. Permadi, U. S. Dharma, and D. Irawan, “Pengaruh campuran bahan bakar minyak plastik dan premium terhadap prestasi mesin sepeda motor,” ARMATUR Artik. Tek. Mesin Manufaktur, vol. 2, no. 2, pp. 86–93, 2021, doi: 10.24127/armatur.v2i2.1447.
I. G. M. Adnyana and W. Suyanto, “Penggunaan EFI scanner sebagai media pembelajaran untuk meningkatkan minat, motivasi, dan prestasi belajar siswa,” J. Pendidik. Vokasi, vol. 3, no. 2, pp. 192–209, 2013, doi: 10.21831/jpv.v3i2.1601.
Mafruddin and D. Irawan, “Pembuatan engine stand sebagai alat bantu praktikum di smk muhammadiyah 1 rumbia lampung tengah,” SNPPM-2 (Seminar Nas. Penelit. dan Pengabdi. Kpd. Masyarakat) Tahun 2020 ISBN 978-623-90328-5-2, vol. 2, pp. 463–467, 2020.
N. R. Mafruddin, Eko Nugroho, Asroni, “Solusi Dan Target Luaran Permasalahan utama yang dihadapi oleh siswa yaitu belum mengetahui dasar-dasar,” Sinar Sang Surya(Jurnal Pus. Pengabdi. Kpd. Masyarakat)Vol. 4, No. 1, Februari 2020, Hal. 29-34e-ISSN2597-484X, vol. 4, no. 1, pp. 29–34, 2020.
N. Sinaga and S. J. Purnomo, “Hubungan antara Posisi Throttle, Putaran Mesin, dan Posisi Gigi terhadap Konsumsi Bahan Bakar pada beberapa Kendaraan Penumpang,” J. Polines, vol. 9, no. 1, pp. 12–17, 2013.
S. Mintoro, “Optimasi Kinerja ECU ( Electronic Control Unit ) Melalui Pemrograman Remapping Pada Mesin EFI,” SEMNAS IIB DARMAJAYA Kotabumi, pp. 458–471, 2017.
S. SherazMohani, M. Waseem, M. Asif, and Z. Asim, “Efficient Low-power Scanner Free On-Board Diagnostics and Monitoring System for Vehicles,” Int. J. Comput. Appl., vol. 107, no. 21, pp. 39–42, 2014, doi: 10.5120/19143-0557.

Downloads

Published

2023-08-15

Issue

Vol. 7 No. 2 (2023): Agustus 2023

Section

Artikel

License

Authors who publish with this journal agree to the following terms:

    • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.  Creative Commons Attribution 4.0 International License.
    • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
    • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
    • The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
Creative Commons License
Creative Commons License
SINAR SANG SURYA: Jurnal Pusat Pengabdian kepada Masyarakat is licensed under a Creative Commons Attribution 4.0 International License.