Perencanaan desain reaktor biodiesel sistem batch untuk produksi biodiesel skala industri kecil

Shofiatul Ula, Fadwah Maghfurah, Syarif Abdullah, Aditiyo Hermawan

Abstract


Recently biodiesel production is produced by large industries. In order to be produced by small industries, the biodiesel production process requires good design which will affect the cost and yield of production. This research aims to make a batch system biodiesel reactor design and find out what materials are used in order to produce small-scale industrial biodiesel. This research is expected to provide small-scale industrial biodiesel production opportunities and the industry able to produce fuel independently. The batch system biodiesel reactor that has been designed production capacity of 144 liters each day. It has the following specifications: consists of 2 volume tubes each of which 38.2 liters with stainless steel material and 2 volume tubes of 38.2 liters each with plastic material HDPE motor power is 260 Kw, shaft diameter 20 mm, pulley length 134 cm using type A, the stirring process uses bevel gear, and the type of gear used is cold dipped steel and S45C steel material. Keywords: design reactor, biodiesel, batch system, small-scale industry


Full Text:

PDF

References


Hambali, E., Mujdalipah, S., Tambuan, A. H., Pattiwiri, A. W., & Hendroko, R. (2007). Teknologi Bioenergi. Jakarta: Agromedia. [2] Hendrawati, T. Y., & Ramadhan, A. I. (2018). Pemetaan Bahan Baku dan analisis Teknoekonomi Biodiesel dari Kelapa sawit. In Pengembangan Energi Baru Terbarukan (EBT) dan green Technology untuk Memandirian Bangsa (p. EBT-3). Jakarta: Fakultas Teknik Universitas Pancasila. [3] Lubis, M. S. W. (2017). Ini 20 Perusahaan Pemasok Biodiesel ke Pertamina & AKR. Retrieved from http://industri.bisnis.com/read/20171 103/44/705707/ini-20-perusahaanpemasok-biodiesel-ke-pertamina-akr [4] Riza. (2015). Spesifikasi Mutu B-20 di Idonesia dan Perbandingannya dengan spesifikasi Biodiesel, Minyak solar dan standard International. Jakarta: Balai Rekayasa Desain dan Sistem Teknologi-BPPT. [5] Setiawati, E., Riset, F. E. B., Standardisasi, D., & Banjarbaru, I. (n.d.). Sebagai alternatif bahan bakar mesin diesel (technology processing of biodiesel from used cooking oil by microfiltration and transesterification techniques as an alternative fuel of diesel engine) 1) 2). Retrieved from http://aesigit.multiply.com/journal/ite m/1 [6] Soelarso. (1997). Dasar-dasar perencanaan dan pemilihan elemen mesin, Pradya Pramita, Jakarta. [7] Suharto. (2017). Bioteknologi dalam Bahan Bakar Nonfosil. Yogyakarta: Andi Yogyakarta. [8] Triwahyuningsih, N., & Adiprasetya,

TURBO p-ISSN: 2301-6663, e-ISSN: 2447-250X Vol. 8 No. 2. 2019

R. (2008). Pemanfaatan Energi Biomassa sebagai Biofuel : Konsep Sinergi dengan Ketahanan Pangan. Yogyakarta. [9] Ula, S., & Kurniadi, W. (2017). Studi kelayakan produksi biodiesel dari minyak jelantah skala industri kecil. Al Jazari Journal of Mechanical Engineering (Vol. 2). [10] Widodo. (2011). Analisis Kelayakan Usaha Pengolahan Minyak Jelantah (Waste Cooking Oil) Menjadi Biodiesel. Thesis (https:// repository.ipb.ac.id/handle/12345678 9/53191).




DOI: http://dx.doi.org/10.24127/trb.v8i2.1049

Refbacks

  • There are currently no refbacks.


 
TURBO : Jurnal Program Studi Teknik Mesin
Program Studi Teknik Mesin Universitas Muhammadiyah Metro
ISSN (online) : 2477-250X
ISSN (cetak)  : 2301-6663
Editorial Address
Jl. Ki Hajar Dewantara No. 116, 15A Iringmulyo, Metro Timur, Kota Metro, Lampung
HP: 0813-7989-1101 (Dwi Irawan) and 0822-8024-5320 (Eko Budi.) 
E-mail: turbo@ojs.ummetro.ac.id, dwi_irawan12@yahoo.co.id, ekobudiyantoiyan@gmail.com