Pengaruh penambahan Silikon pada remelting piston motor bekas menggunakan tungku induksi terhadap kekuatan tarik dan kekerasan

Eko Nugroho, Eko Budiyanto, Aji Dawam Firdaus

Abstract


Aluminum is one of the most widely used non-ferrous metals in industry and engineering because of its light weight and resistance to corrosion. The purpose of this study is to change the waste of used motor pistons using an induction furnace by recycling or remelting the material and adding a mixture of silicon with variations of 8%, 10% and 12% to improve its mechanical properties. In this research, I used the main furnace for the smelting. The results of this study in the tensile test showed that the strength and wear strength increased with the addition of silicon elements but became brittle and stiff this happened because the value of the elastic modulus decreased with the addition of silkon elements, namely at 12% at 1.06 N/mm² and at a variation of 8 % of 1.13 N/mm². In the hardness test, it was found that the addition of silicon to aluminum with variations of 8%, 10% and 12% increased the hardness of the material.

Full Text:

PDF (304-309)


DOI: http://dx.doi.org/10.24127/trb.v10i2.1823

Refbacks

  • There are currently no refbacks.


 
TURBO : Jurnal Program Studi Teknik Mesin
Program Studi Teknik Mesin Universitas Muhammadiyah Metro
ISSN (online) : 2477-250X
ISSN (cetak)  : 2301-6663
Editorial Address
Jl. Ki Hajar Dewantara No. 116, 15A Iringmulyo, Metro Timur, Kota Metro, Lampung
HP: 0813-7989-1101 (Dwi Irawan) and 0822-8024-5320 (Eko Budi.) 
E-mail: turbo@ojs.ummetro.ac.id, dwi_irawan12@yahoo.co.id, ekobudiyantoiyan@gmail.com