PENGARUH PENAMBAHAN TURBO CYCLONE AKSIAL TERHADAP ALIRAN DAN PERFORMA MOTOR BAKAR

Yusuf Rizal Fauzi

Abstract


Complete combustion is a process that is expected in a burning, this can be achieved when a mixture of fuel and air evenly and fairly homogeneously distributed in the engine cylinder. This research aims to determine the effect of the flow and performance of the Honda GL PRO motorcycles with a cylinder capacity of 156 cc. This test is done to determine the effect of pre-combustion and post-combustion engine using turbo cyclone and the flow passing through the carburetor. This method uses fluent 6.2 software and statistical tests. With the use of axial turbo cyclone, it can improve the performance of gasoline engine with swirl flow obtaining fuel-air mixture better and get the desired performance. The results obtained from testing Effective Power by using turbo cyclone is 0.7239654 HP average, and 0.4151938 HP average without turbo cyclone. Torque by using turbo cyclone 0.2592512 kg.m average, and 0.1486808 kg.m average without turbo cyclone, the value of Effective Fuel Consumption by using turbo cyclone is 0.325596 kg/HP.hour average and 0.9273914 kg/HP.hour average without turbo cyclone. Efficiency Thermic Effective (ηe) by using turbo cyclone is 14.1434058 % average and 6.229145 % average without turbo cyclone.
Keywords: Turbo cyclone, performance, and flow.


Full Text:

PDF

References


Rudi Rubiantoro ,”Study Banding Unjuk Kerja dan Emisi Gas Buang dari Motor Bensin 4 Langkah terhadap Penambahan Peralatan Turbo Cyclone”,Tugas Akhir Teknik Mesin FTI ITS, 1989.

Wisnu Satria I ,”Study eksperimental tentang karakteristik medan aliran tiga dimensi pada saluran outlet dari model internal flow cyclone (IFC)”Tugas akhir Teknik Mesin FTI ITS, 2001.

I’im Nurhadi ,”Study eksperimental tentang pengaruh penambahan turbo cyclone terhadap intensitas vortek pada saluran berpenampang sirkular dengan luasan konstan”, Tugas Akhir Teknik Mesin FTI ITS, 1999.

Victor L. street and E. Benjamin Wyle,” Fluid mechanic”,sevent edition , new york: McGraw-Hill ,

John B Heywood, “Internal combustion engine fundamental”, Mc Graw-Hill book company, 1989.

Richard Stone, “Introduction to internal combustion engines”, second edition, Mucmillan, 1992.

M.L.Mathur and R.P.Sharma, ”A course in internal combustion engines”, Dhanpat Rai & Sons, 1980.

Raymond C Binder , “Fluid mechanics “, fifth edition , New Delhi , 1975

Hans J.Lught , “Vortex flow in nature and technology “, new york, 1983.

Fox, R.W. and Mc Donald, A.T., ”Introduction to Fluid Mechanics”,3rd edition, Jhon Willey and Sons, New York, 1985.




DOI: http://dx.doi.org/10.24127/trb.v7i1.679

Refbacks

  • There are currently no refbacks.


Google Scholar
Dimensions
   
 
TURBO : Jurnal Program Studi Teknik Mesin
Program Studi Teknik Mesin Universitas Muhammadiyah Metro
ISSN (online) : 2477-250X
ISSN (cetak)  : 2301-6663
Editorial Address
Jl. Ki Hajar Dewantara No. 116, 15A Iringmulyo, Metro Timur, Kota Metro, Lampung
HP: 0813-6909-0367 (Bambang Surono) 
E-mail: turbo@ummetro.ac.id; turboummetro@gmail.com; al.qodimy@gmail.com, 
 

 

slot online